S31260 Stainless plate|S31260 Stainless sheet

UNS S31260 Stainless plate|S31260 Stainless sheet|S31260 Coil
 
UNS standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general application UNS. United iron and steel limited export high quality UNS grade N08020, N08367, N08800 N08811, N08904, N08926, S31277, S20100, S20103, S20153, S20161, S20200, S20400, S20910, S21400, S21600, S21603, S21800, S24000, S30100, S30103, S30153, S30200, S30400, S30403, S30409, S30415, S30451, S30452, S30453, S30500, S30600, S30601, S30615, S30815, S30908, S30909, S30940, S30941, S31008, S31009, S31040, S31041, S31050, S31060, S31254, S31266, S31600, S31603, S31609, S31635, S31640, S31651, S31653, S31700, S31703, S31725, S31726, S31753, S32050, S32100, S32109, S32615, S32654, S33228, S33400, S34565, S34700, S34709, S34800, S34809, S35045, S35135, S35315, S38100, S38815, S31200, S31260, S31803, S32001, S32003, S32101, S32205, S32304, S32520, S32550, S32750, S32760, S32900, S32906, S32950, S32803, S40500, S40900, S40910, S40920, S40930, S40945, S40975, S40977, S41000, S41003, S41008, S41045, S41050, S41500, S42035, S42900,S43000,S43035,S43400,S43600,S43932,S43940,S44400,S44500,S44626,S44627,S44635, S44660, S44700, S44735, S44800, S46800.
 
United iron and steel produce and export UNS S31260 Stainless plate thickness to 400mm, heavy thickness plate, cutting to flat bar, cutting profiled from stainless plate. For our quotation, please send email to sales@unitedsteelplate.com
 
UNS S31260 stainless steel chemical composition requirements

UNS S31260 Chemical Composition
Grade	The Element Max (%)
	C	Mn	P	S	Si	Cr	Ni
UNS S31260	0.03	1.00	0.030	0.030	0.75	24-26	5.5-7.5
	Mo	N	Cu	Cb	Ti
	2.5-3.5	0.10-0.30	0.20-0.80

Noted: UNS S31260
A . Maximum, unless range or minimum is indicated.
B Designation established in accordance with Practice E527 and SAE J1086.
C .Unless otherwise indicated, a Grade designation originally assigned by the American Iron and Steel Institute (AISI).
D .Carbon analysis shall be reported to nearest 0.01% except for the low-carbon types, which shall be reported to nearest 0.001%.
E .The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
F .When two minimums or two maximums are listed for a single type, as in the case of both value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
G. Common name, not a trademark, widely used, not associated with any one producer.
H. Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements. I (Al +Ti) 0.85–1.20.
J. Naming system developed and applied by ASTM.
K .Cr+3.3Mo+16Np 40 min.
L .S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409 shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930, may at the option of the manufacturer be certified as S40900.
M .Plate version of CA-6NM.
N Product (check or verification analysis) tolerance over the maximum limit for C and N in XM-27 shall be 0.002%.
 
UNS S31260 Mechanical Properties  
UNS S31260 Materials for high temperature Service
 
SUPPLEMENTARY REQUIREMENTS
S1. Charpy Impact Testing of Plate UNS S31260
S2. Materials for High-Temperature Service UNS S31260
 
EQUIVALENT STEEL GRADE UNS S31260 OF UNS
 
If any need in UNS S31260, please contact us by email sales@unitedsteelplate.com