UNS C95720 Copper plate|C95720 copper sheet|C95720 alloy

UNS C95720 Copper plate|C95720 copper sheet|C95720 alloy
 
United iron and steel limited manufacture and export Copper aluminum iron and copper aluminum iron nickel plate C95200 C95210 C95220 C95300 C95400 C95410 C95420 C95500 C95510 C95520 C95600 C95700 C95710 C95720 C95800 C95810 C95820 C95900. If you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
 
C95720 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
 
C95720 Chemical Composition

Coppers Nominal Chemical Composition %
Copper C95720	Cu	Pb	Fe	Ni	Al	Mn	Mg	Si	Zn
	Min73	0.03	1.5-3.5	3-6	6-8	12-15		0.1	0.1
	Sn
	0.1
Designation: Copper aluminum iron and copper aluminum iron nickel plate
Note: Composition percent maximum unless shown as a range or a minimum

(1) : Cu + Sum of Named Elements, 99.0% min.
(2) : Ni value includes Co.
(3) : Cu + Sum of Named Elements, 99.5% min.
(4) : Cu + Sum of Named Elements, 99.8% min.
(5) : Fe content shall not exceed Ni content.
(6) : Cu + Sum of Named Elements, 99.2% min.
 
C95720 Properties

C95720 Properties		C95720 Conditions
		T (°C)	Treatment
Density (×1000 kg/m3)
Poisson's Ratio
Elastic Modulus (GPa)
Tensile Strength (Mpa)			(flat products, wire, rod, shapes, tube)
Yield Strength (Mpa)
Elongation (%)
Reduction in Area (%)
Note: Elongation is measured in 5 inches.

 
C95720 Copper supplied Specification:

Coppers C95720	Hot Rolled Coppers plate			Cold Rolled Coppers plate
	Thickness mm	Width mm	Length mm	Thickness mm	Width mm	Length mm
Red Copper	6-15	400-3000	1000-6000	0.2-0.49	300-600	1000-1500
	16-20	400-3000		0.5-2.5	600-1000	1000-2500
	21-50	600-3000		3-10	600-2500	1000-3000
	>10-110	600-1000
Yellow Brass	6-15	400-2000	1000-6000	0.2-0.49	300-600	1000-1500
	16-20	400-2000		0.5-2.5	400-1000	1000-3000
	>60	600-2500		3-10	600-2000	1000-2500
Bronze	>2.5	600-1000	1000-6000	0.4-0.49	300-500	600-1500
				0.5-2.5	500-600	1000-3000
				3-10	500-1000	600-2000
Cupronickel	>2.5	400-1500	1000-6000	0.5-2.5	300-600	600-1500
				3-10	300-1000	600-1500

 
C95720 Processing and Property:  Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
 
C95720 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
 
C95720 Equivalent Grade for Copper alloy

Equivalent Grade for Copper alloy
GB	DIN		EN		ISO	UNS	JIS
	KRUZZEICHEN	NUMBER	Symbol	Number	Symbol	Number	Number
-	-	-	-	-	-	C95720	-

 
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C95720 Copper alloy material; please contact us by email sales@unitedsteelplate.com