UNS C91000 Bronze plate|C91000 Bronze sheet|C91000 Tin Bronz

Come from:United Iron and Steel Limited  Editor:United Iron and stee Access:

UNS C91000 Bronze plate|C91000 Bronze sheet|C91000 Tin Bronze
 
United iron and steel limited manufacture and export Copper tin alloy plate C90200 C90300 C90500 C90700 C90710 C90800 C90810 C90900 C91000 C91100 C91300 C91600 C91700 Tin Bronzes. If you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
 
C91000 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
 
C91000 Chemical Composition
Coppers Nominal Chemical Composition %
Copper
C91000
Cu Sn Pb Zn Fe Sb Ni S P
 84-86 14-16 0.2 1.5 0.1 0.2 0.8 0.05 0.05
Al Si Mn            
0.005 0.005              
Designation: Tin Bronzes Copper Tin Alloy  
Note: Composition percent maximum unless shown as a range or a minimum
(1) : Cu + Sum of Named Elements, 99.4% min..
(2) : In determining Cu min., Cu may be calculated as Cu + Ni.
(3) : Ni value includes Co.
(4) : For continuous castings, P shall be 1.5%, max.
(5) : Cu + Sum of Named Elements, 99.7% min.
 
C91000 Properties
C91000 Properties C91000 Conditions
T (°C) Treatment
Density (×1000 kg/m3)      
Poisson's Ratio      
Elastic Modulus (GPa)      
Tensile Strength (Mpa)     (flat products, wire, rod, shapes, tube)
Yield Strength (Mpa)  
Elongation (%)  
Reduction in Area (%)  
Note: Elongation is measured in 5 inches.
 
C91000 Copper supplied Specification:
Coppers
C91000
Hot Rolled Coppers plate Cold Rolled Coppers plate
Thickness mm Width mm Length mm Thickness mm Width mm Length mm
Red Copper 6-15 400-3000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-3000 0.5-2.5 600-1000 1000-2500
21-50 600-3000 3-10 600-2500 1000-3000
>10-110 600-1000      
Yellow Brass 6-15 400-2000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-2000 0.5-2.5 400-1000 1000-3000
>60 600-2500 3-10 600-2000 1000-2500
Bronze >2.5 600-1000 1000-6000 0.4-0.49 300-500 600-1500
0.5-2.5 500-600 1000-3000
3-10 500-1000 600-2000
Cupronickel >2.5 400-1500 1000-6000 0.5-2.5 300-600 600-1500
3-10 300-1000 600-1500
 
C91000 Processing and Property:  Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
 
C91000 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
 
C91000 Equivalent Grade for Copper alloy
Equivalent Grade for Copper alloy
GB DIN EN ISO UNS JIS
  KRUZZEICHEN NUMBER Symbol Number Symbol Number Number
- - - - - - C91000 -
 
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C91000 Copper alloy material; please contact us by email sales@unitedsteelplate.com