moreSTEEL PRODUCT
- Shipbuilding steel plate
- High Strength Steel Plate
- Stainless Steel Material
- Copper and Brass Plate/Sheet
- Boiler & Pressure Steel Plate
- Low Alloy High Strength Plate
- Copper Bar/Copper Rod
- ASTM/ASME STEEL PLATE/SHEET
- Aluminum Plate/Sheet
- Alloy Aluminum Row
- Carbon Steel Material
- Copper Pipe/Copper Tube
moreCONTACT US
Sales Department
Email:David@gangsteel.comSkype:gangsteel001
Tel:0086-13598879167
UNS C69710 copper alloy|C69710 zinc alloy|C69710 plate
Come from:United Iron and Steel Limited Editor:United Iron and stee Access:
UNS C69710 copper alloy|C69710 zinc alloy|C69710 plate|C69710 sheet
United iron and steel limited could manufacture and export C66200 C66300 C66400 C66410 C66420 C66430 C66700 C66800 C66900 C66950 C67000 C67300 C67400 C67420 C67500 C67600 C68000 C68100 C68700 C68800 C69050 C69100 C69300 C69400 C69430 C69700 C69710 C69750 zinc alloy manganese brass, manganese bronze, bronze low fuming nickel, bronze low fuming, aluminum brass. if you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
C69710 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
C69710 Chemical Composition
(1) : Cu + Sum of Named Elements, 99.5% min.
(2) : Ni value includes Co.
(3) : Fe + Co, 1.4 - 2.4%
(4) : Fe + Co, 1.8 - 2.3%.
(5) : Cu + Sum of Named Elements, 99.8% min.
(6) : Al + Zn, 25.1 - 27.1%.
C69710 Properties
C69710 Copper supplied Specification:
C69710 Processing and Property: Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
C69710 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
C69710 Equivalent Grade for Copper alloy
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C69710 Copper alloy material; please contact us by email sales@unitedsteelplate.com
United iron and steel limited could manufacture and export C66200 C66300 C66400 C66410 C66420 C66430 C66700 C66800 C66900 C66950 C67000 C67300 C67400 C67420 C67500 C67600 C68000 C68100 C68700 C68800 C69050 C69100 C69300 C69400 C69430 C69700 C69710 C69750 zinc alloy manganese brass, manganese bronze, bronze low fuming nickel, bronze low fuming, aluminum brass. if you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
C69710 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
C69710 Chemical Composition
Coppers Nominal Chemical Composition % | |||||||||
Copper | Cu | Pg | Fe | Sn | Zn | Ni | Al | Mn | Si |
C69710 | 75-80 | 0.5-1.5 | 0.2 | Rem | 0.4 | 2.5-3.5 | |||
Designation: copper silicon alloys | |||||||||
Note: Composition percent maximum unless shown as a range or a minimum |
(2) : Ni value includes Co.
(3) : Fe + Co, 1.4 - 2.4%
(4) : Fe + Co, 1.8 - 2.3%.
(5) : Cu + Sum of Named Elements, 99.8% min.
(6) : Al + Zn, 25.1 - 27.1%.
C69710 Properties
C69710 Properties | C69710 Conditions | ||
T (°C) | Treatment | ||
Density (×1000 kg/m3) | |||
Poisson's Ratio | |||
Elastic Modulus (GPa) | |||
Tensile Strength (Mpa) | (flat products, wire, rod, shapes, tube) | ||
Yield Strength (Mpa) | |||
Elongation (%) | |||
Reduction in Area (%) | |||
Note: Elongation is measured in 5 inches. |
C69710 Copper supplied Specification:
Coppers C69710 |
Hot Rolled Coppers plate | Cold Rolled Coppers plate | ||||
Thickness mm | Width mm | Length mm | Thickness mm | Width mm | Length mm | |
Red Copper | 6-15 | 400-3000 | 1000-6000 | 0.2-0.49 | 300-600 | 1000-1500 |
16-20 | 400-3000 | 0.5-2.5 | 600-1000 | 1000-2500 | ||
21-50 | 600-3000 | 3-10 | 600-2500 | 1000-3000 | ||
>10-110 | 600-1000 | |||||
Yellow Brass | 6-15 | 400-2000 | 1000-6000 | 0.2-0.49 | 300-600 | 1000-1500 |
16-20 | 400-2000 | 0.5-2.5 | 400-1000 | 1000-3000 | ||
>60 | 600-2500 | 3-10 | 600-2000 | 1000-2500 | ||
Bronze | >2.5 | 600-1000 | 1000-6000 | 0.4-0.49 | 300-500 | 600-1500 |
0.5-2.5 | 500-600 | 1000-3000 | ||||
3-10 | 500-1000 | 600-2000 | ||||
Cupronickel | >2.5 | 400-1500 | 1000-6000 | 0.5-2.5 | 300-600 | 600-1500 |
3-10 | 300-1000 | 600-1500 |
C69710 Processing and Property: Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
C69710 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
C69710 Equivalent Grade for Copper alloy
Equivalent Grade for Copper alloy | |||||||
GB | DIN | EN | ISO | UNS | JIS | ||
KRUZZEICHEN | NUMBER | Symbol | Number | Symbol | Number | Number | |
- | - | - | - | - | - | C69710 | - |
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C69710 Copper alloy material; please contact us by email sales@unitedsteelplate.com
tags:
C69710 zinc brass sheet
UNS C69710 wrought alloys
UNS C69710 copper Zinc alloy
UNS C69710 brass property
UNS C69710 chemical
UNS C69710 hardness
UNS C69710 composition
UNS C69710 mechanical
UNS C69710 equivalent
UNS C69710 price
UNS C69710 supplier
C69710 Copper silicon alloys
Zinc brass C69710
UNS C69710 brass sheet
UNS C69710 brass plate
UNS C69710 Zinc alloy
C69710
UNS C69710
UNS C69710 Copper
UNS C69710 Copper alloy
UNS C69710 Copper plate
UNS C69710 Copper sheet
UNS C69710 bronzes
UNS C69710 bronzes plate
UNS C69710 bronzes sheet
UNS C69710 Zinc bronzes
UNS C69710 Zinc bronzes plate
UNS C69710 Zinc bronzes sheet
UNS C69710 Zinc brass