UNS C41500 Tin brass|C41500 Penny bronze|C41500 plate

Come from:United Iron and Steel Limited  Editor:United Iron and stee Access:

UNS C41500 Tin brass|C41500 Penny bronze|C41500 plate|C41500 sheet
 
United iron and steel limited could manufacture and export UNS C40400 C40500 C40810 C40820 C40850 C40860 C41000 C41100 C41120 C41300 C41500 C42000 C42200 C42500 C42520 C42600 C43000 C43400 C43500 C43600 C44250 C44300 C44400 C44500 C46200 C46400 C46500 C47000 C47940 C48200 C48500 C48600 Copper Zinc Tin alloys (Tin brasses).
 
Dispersion: Copper Zinc Tin Alloys ,Tin brasses, Penny bronze, admiralty arsenical, admiralty antimonial, admiralty, Naval brass, Naval brass uninhibited, naval brass arsenical, naval brass welding and brazing rod, naval brass medium leaded, naval brass high leaded.
If you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
 
C41500 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
 
C41500 Chemical Composition
Coppers Nominal Chemical Composition %
Copper Cu Pb Fe Sn Zn P  
C41500 89.0-93.0 0.10 0.05 1.5-2.2 Rem.    
Designation: Copper Zinc Tin Alloys Tin Brasses  
Note: Composition percent maximum unless shown as a range or a minimum
(1): Cu + Sum of Named Elements, 99.7% min.
(2): Cu + Sum of Named Elements, 99.5% min.
(3): Ni value includes Co
(4): Cu + Sum of Named Elements, 99.6% min.
(5): For tubular products, the minimum Sn content may be .9%.
 
C41500 Properties
C41500 Properties C41500 Conditions
T (°C) Treatment
Density (×1000 kg/m3)      
Poisson's Ratio      
Elastic Modulus (GPa)      
Tensile Strength (Mpa)     (flat products, wire, rod, shapes, tube)
Yield Strength (Mpa)  
Elongation (%)  
Reduction in Area (%)  
Note: Elongation is measured in 5 inches.
 
C41500 Copper supplied Specification:
Coppers
C41500
Hot Rolled Coppers plate Cold Rolled Coppers plate
Thickness mm Width mm Length mm Thickness mm Width mm Length mm
Red Copper 6-15 400-3000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-3000 0.5-2.5 600-1000 1000-2500
21-50 600-3000 3-10 600-2500 1000-3000
>10-110 600-1000      
Yellow Brass 6-15 400-2000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-2000 0.5-2.5 400-1000 1000-3000
>60 600-2500 3-10 600-2000 1000-2500
Bronze >2.5 600-1000 1000-6000 0.4-0.49 300-500 600-1500
0.5-2.5 500-600 1000-3000
3-10 500-1000 600-2000
Cupronickel >2.5 400-1500 1000-6000 0.5-2.5 300-600 600-1500
3-10 300-1000 600-1500
 

















C41500 Processing and Property:  Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
 
C41500 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
 
C41500 Equivalent Grade for Copper alloy
Equivalent Grade for Copper alloy
GB DIN EN ISO UNS JIS
  KRUZZEICHEN NUMBER Symbol Number Symbol Number Number
- - - - - - C41500 -
 
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C41500 Copper alloy material; please contact us by email sales@unitedsteelplate.com