moreSTEEL PRODUCT
- Shipbuilding steel plate
- High Strength Steel Plate
- Stainless Steel Material
- Copper and Brass Plate/Sheet
- Boiler & Pressure Steel Plate
- Low Alloy High Strength Plate
- Copper Bar/Copper Rod
- ASTM/ASME STEEL PLATE/SHEET
- Aluminum Plate/Sheet
- Alloy Aluminum Row
- Carbon Steel Material
- Copper Pipe/Copper Tube
moreCONTACT US
Sales Department
Email:David@gangsteel.comSkype:gangsteel001
Tel:0086-13598879167
C19410 copper plate|C19410 copper alloy|C19410 sheet
Come from:United Iron and Steel Limited Editor:United Iron and stee Access:
C19410 copper plate|C19410 copper alloy|C19410 sheet
United iron and steel limited could produce and supply C19410 C19410 C19410 C19410 C19410 C19410 C19410 C19410 C19450 C19500 C19520 C19700 C19710 C19720 C19750 C198High copper alloys plate
Dispersion: High copper alloys If you need in C19410 copper material, please contact us by email address: sales@unitedsteelplate.com
C19410 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
C19410 Chemical Composition
(1) : Cu + Sum of Named Elements, 99.8% min.
(2) : Cu + Sum of Named Elements, 99.9% min.
(3) : Cu + Sum of Named Elements, 99.5% min.
(4) : Ni value includes Co.
C19410 Properties
C19410 Copper supplied Specification:
C19410 Processing and Property: Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
C19410 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
C19410 Equivalent Grade for Copper alloy
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C19410 Copper alloy material; please contact us by email sales@unitedsteelplate.com
United iron and steel limited could produce and supply C19410 C19410 C19410 C19410 C19410 C19410 C19410 C19410 C19450 C19500 C19520 C19700 C19710 C19720 C19750 C198High copper alloys plate
Dispersion: High copper alloys If you need in C19410 copper material, please contact us by email address: sales@unitedsteelplate.com
C19410 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
C19410 Chemical Composition
Coppers Nominal Chemical Composition % | ||||||||
Copper | Cu | Fe | Sn | Zn | Al | Pb | P | |
C19410 | Rem. | 2.1-2.6 | - | 0.05-0.20 | - | 0.03 | 0.015-0.15 | |
Designation: High copper alloys Description: |
||||||||
Note: Composition percent maximum unless shown as a range or a minimum |
(2) : Cu + Sum of Named Elements, 99.9% min.
(3) : Cu + Sum of Named Elements, 99.5% min.
(4) : Ni value includes Co.
C19410 Properties
C19410 Properties | C19410 Conditions | ||
T (°C) | Treatment | ||
Density (×1000 kg/m3) | |||
Poisson's Ratio | |||
Elastic Modulus (GPa) | |||
Tensile Strength (Mpa) | (flat products, wire, rod, shapes, tube) | ||
Yield Strength (Mpa) | |||
Elongation (%) | |||
Reduction in Area (%) | |||
Note: Elongation is measured in 5 inches. |
C19410 Copper supplied Specification:
Coppers C19410 |
Hot Rolled Coppers plate | Cold Rolled Coppers plate | ||||
Thickness mm | Width mm | Length mm | Thickness mm | Width mm | Length mm | |
Red Copper | 6-15 | 400-3000 | 1000-6000 | 0.2-0.49 | 300-600 | 1000-1500 |
16-20 | 400-3000 | 0.5-2.5 | 600-1000 | 1000-2500 | ||
21-50 | 600-3000 | 3-10 | 600-2500 | 1000-3000 | ||
>10-110 | 600-1000 | |||||
Yellow Brass | 6-15 | 400-2000 | 1000-6000 | 0.2-0.49 | 300-600 | 1000-1500 |
16-20 | 400-2000 | 0.5-2.5 | 400-1000 | 1000-3000 | ||
>60 | 600-2500 | 3-10 | 600-2000 | 1000-2500 | ||
Bronze | >2.5 | 600-1000 | 1000-6000 | 0.4-0.49 | 300-500 | 600-1500 |
0.5-2.5 | 500-600 | 1000-3000 | ||||
3-10 | 500-1000 | 600-2000 | ||||
Cupronickel | >2.5 | 400-1500 | 1000-6000 | 0.5-2.5 | 300-600 | 600-1500 |
3-10 | 300-1000 | 600-1500 |
C19410 Processing and Property: Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
C19410 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
C19410 Equivalent Grade for Copper alloy
Equivalent Grade for Copper alloy | |||||||
GB | DIN | EN | ISO | UNS | JIS | ||
KRUZZEICHEN | NUMBER | Symbol | Number | Symbol | Number | Number | |
- | - | - | - | - | - | C19410 | - |
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C19410 Copper alloy material; please contact us by email sales@unitedsteelplate.com
tags:
UNS C19410 sheet
C19410 chemical
C19410 composition
C19410 property
C19410 mechanical
C19410 tensile
C19410 yield
C19410
C19410 copper plate
C19410 copper sheet
UNS C19410 plate
C19410 equivalent
C19410 provider
C19410 specification
C19410 price
C19410 origin
C19410 supplier
C19410 coil
UNS C19410
C19410 copper
C19410 copper alloy
C19410 plate
C19410 sheet
C19410 High copper alloys