C19010 copper plate|C19010 copper alloy|C19010 sheet

C19010 copper plate|C19010 copper alloy|C19010 sheet
 
United iron and steel limited could produce and supply C18900 C18990 C19000 C19002 C19010 C19015 C19020 C19025 C19030 C19100 C19140 C19150 C19160 High copper alloys plate
Dispersion: High copper alloys If you need in C18900 copper material, please contact us by email address: sales@unitedsteelplate.com
 
C19010 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
 
C19010 Chemical Composition
 

Coppers Nominal Chemical Composition %
Copper	Cu(incl Ag)	Fe	Sn	Ni	Co	Cr	Si	Be	Pb
C19010	Rem,	-	-	0.8-1.8	-	-	0.15-0.35	-	-
Designation: High copper alloys Description:
Note: Composition percent maximum unless shown as a range or a minimum

(1) : Cu + Sum of Named Elements, 99.5% min.
(2) : Cu + Sum of Named Elements, 99.9% min.
(3) : Ni value includes Co
(4) : Cu + Sum of Named Elements, 99.8% min.
(5) : Cu + Sum of Named Elements, 99.7% min.
 
C19010 Properties

C19010 Properties		C19010 Conditions
		T (°C)	Treatment
Density (×1000 kg/m3)
Poisson's Ratio
Elastic Modulus (GPa)
Tensile Strength (Mpa)			(flat products, wire, rod, shapes, tube)
Yield Strength (Mpa)
Elongation (%)
Reduction in Area (%)
Note: Elongation is measured in 5 inches.

 
C19010 Copper supplied Specification:

Coppers C19010	Hot Rolled Coppers plate			Cold Rolled Coppers plate
	Thickness mm	Width mm	Length mm	Thickness mm	Width mm	Length mm
Red Copper	6-15	400-3000	1000-6000	0.2-0.49	300-600	1000-1500
	16-20	400-3000		0.5-2.5	600-1000	1000-2500
	21-50	600-3000		3-10	600-2500	1000-3000
	>10-110	600-1000
Yellow Brass	6-15	400-2000	1000-6000	0.2-0.49	300-600	1000-1500
	16-20	400-2000		0.5-2.5	400-1000	1000-3000
	>60	600-2500		3-10	600-2000	1000-2500
Bronze	>2.5	600-1000	1000-6000	0.4-0.49	300-500	600-1500
				0.5-2.5	500-600	1000-3000
				3-10	500-1000	600-2000
Cupronickel	>2.5	400-1500	1000-6000	0.5-2.5	300-600	600-1500
				3-10	300-1000	600-1500

 

















C19010 Processing and Property:  Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
 
C19010 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
 
C19010 Equivalent Grade for Copper alloy

Equivalent Grade for Copper alloy
GB	DIN		EN		ISO	UNS	JIS
	KRUZZEICHEN	NUMBER	Symbol	Number	Symbol	Number	Number
-	-	-	-	-	-	C19010	-

 
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C19010 Copper alloy material; please contact us by email sales@unitedsteelplate.com