UNS C95800 Copper plate|C95800 copper sheet|C95800 alloy

Come from:United Iron and Steel Limited  Editor:United Iron and stee Access:

UNS C95800 Copper plate|C95800 copper sheet|C95800 alloy
 
United iron and steel limited manufacture and export Copper aluminum iron and copper aluminum iron nickel plate C95200 C95210 C95220 C95300 C95400 C95410 C95420 C95500 C95510 C95520 C95600 C95700 C95710 C95720 C95800 C95810 C95820 C95900. If you have any need in cooper, please contact us by email address: sales@unitedsteelplate.com
 
C95800 Copper alloy is usual be used in bus bars, bus conductors, waveguides, hollow conductors, lead-in wires and anodes for vacuum tubes, vacuum seals, transistor components, glass-to-metal seals, coaxial cables, klystrons, microwave tubes, and rectifiers.
 
C95800 Chemical Composition
Coppers Nominal Chemical Composition %
Copper
C95800
Cu Pb Fe Ni Al Mn Mg Si Zn
     Min79 0.03 3.5-4.5 8.5-5.0 0.8-1.5   0.1    
Sn                
                 
Designation: Copper aluminum iron and copper aluminum iron nickel plate  
Note: Composition percent maximum unless shown as a range or a minimum
(1) : Cu + Sum of Named Elements, 99.0% min.
(2) : Ni value includes Co.
(3) : Cu + Sum of Named Elements, 99.5% min.
(4) : Cu + Sum of Named Elements, 99.8% min.
(5) : Fe content shall not exceed Ni content.
(6) : Cu + Sum of Named Elements, 99.2% min.
 
C95800 Properties
C95800 Properties C95800 Conditions
T (°C) Treatment
Density (×1000 kg/m3)      
Poisson's Ratio      
Elastic Modulus (GPa)      
Tensile Strength (Mpa)     (flat products, wire, rod, shapes, tube)
Yield Strength (Mpa)  
Elongation (%)  
Reduction in Area (%)  
Note: Elongation is measured in 5 inches.
 
C95800 Copper supplied Specification:
Coppers
C95800
Hot Rolled Coppers plate Cold Rolled Coppers plate
Thickness mm Width mm Length mm Thickness mm Width mm Length mm
Red Copper 6-15 400-3000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-3000 0.5-2.5 600-1000 1000-2500
21-50 600-3000 3-10 600-2500 1000-3000
>10-110 600-1000      
Yellow Brass 6-15 400-2000 1000-6000 0.2-0.49 300-600 1000-1500
16-20 400-2000 0.5-2.5 400-1000 1000-3000
>60 600-2500 3-10 600-2000 1000-2500
Bronze >2.5 600-1000 1000-6000 0.4-0.49 300-500 600-1500
0.5-2.5 500-600 1000-3000
3-10 500-1000 600-2000
Cupronickel >2.5 400-1500 1000-6000 0.5-2.5 300-600 600-1500
3-10 300-1000 600-1500
 
C95800 Processing and Property:  Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.
 
C95800 Corrosion Resistance: Good to excellent. Susceptible to galvanic corrosion when coupled with iron, aluminum, magnesium, leads, tin, and zinc. Good resistance to atmospheric, brackish water, sea water, and non-oxidizing acid corrosion, but avoid heating in oxidizing atmospheres or exposing to oxidizing acids, moist halogens, sulfides, ammonia, or solutions with ammonium ions.
 
C95800 Equivalent Grade for Copper alloy
Equivalent Grade for Copper alloy
GB DIN EN ISO UNS JIS
  KRUZZEICHEN NUMBER Symbol Number Symbol Number Number
- - - - - - C95800 -
 
United iron and steel limited also have stock sizes at our warehouse, if you have requirement in C95800 Copper alloy material; please contact us by email sales@unitedsteelplate.com